TOPON TOOLS CO.,LTD

HAMMER DRILLS

MASONRY DRILL BITS

CHISELS

TOPON TOOLS CO.,LTD.
Tel: 0086-571-87655659
Fax: 0086-571-87652659
P.C : 325200
M.T.:0086-13957709010
QQ/WECHAT: 439362481
SKYPE ID：andyji28
WHATSAPP: 0086-13957709010
E-mail: SALES@TOPONTOOLS.COM
andyji28@126.com

[BACK]

Product Name：	Annular cutter with tungsten-carbide cutting Edges and threaded retainer	Product categories：
Product descriptions ：

Annular cutter with tungsten-carbide cutting
Edges and threaded retainer

Cutting edges: tungsten- Carbide
Cutting depth: 50 mm
Adapter: thread
Machine no.: 1200
Right-hand cutting

for use in magnetic-stand and
column drilling machines with
MK retainer. Suitable for steel
(l girders, large-dimension
sheets), cast steel,non-ferrous
and light metals, plastics

Packing unit: individual plastic pack

Part NO .	Ømm	For arbor	Number of teeth
TPH09018	18.0	MK 2 / MK 3	6
TPH09019	19.0	MK 2 / MK 3	6
TPH09020	20.0	MK 2 / MK 3	6
TPH09021	21.0	MK 2 / MK 3	6
TPH09022	22.0	MK 2 / MK 3	6
TPH09023	23.0	MK 2 / MK 3	6
TPH09024	24.0	MK 2 / MK 3	6
TPH09025	25.0	MK 2 / MK 3	6
TPH09026	26.0	MK 2 / MK 3	6
TPH09027	27.0	MK 2 / MK 3	6
TPH09028	28.0	MK 2 / MK 3	6
TPH09029	29.0	MK 2 / MK 3	6
TPH09030	30.0	MK 2 / MK 3	6
TPH09031	31.0	MK 2 / MK 3	6
TPH09032	32.0	MK 2 / MK 3	6
TPH09033	33.0	MK 2 / MK 3	6
TPH09034	34.0	MK 2 / MK 3	6
TPH09035	35.0	MK 2 / MK 3	6
TPH09036	36.0	MK 2 / MK 3	6
TPH09037	37.0	MK 2 / MK 3	6
TPH09038	38.0	MK 2 / MK 3	6
TPH09039	39.0	MK 2 / MK 3	6
TPH09040	40.0	MK 2 / MK 3	8
TPH09041	41.0	MK 2 / MK 3	8
TPH09042	42.0	MK 2 / MK 3	8
TPH09043	43.0	MK 2 / MK 3	8
TPH09044	44.0	MK 2 / MK 3	8
TPH09045	45.0	MK 2 / MK 3	8
TPH09046	46.0	MK 2 / MK 3	8
TPH09047	47.0	MK 2 / MK 3	8
TPH09048	48.0	MK 2 / MK 3	8
TPH09049	49.0	MK 2 / MK 3	8
TPH09050	50.0	MK 2 / MK 3	8
TPH09051	51.0	MK 2 / MK 3	8
TPH09052	52.0	MK 2 / MK 3	8
TPH09053	53.0	MK 2 / MK 3	8
TPH09054	54.0	MK 2 / MK 3	8
TPH09055	55.0	MK 2 / MK 3	8
TPH09060	60.0	MK 2 / MK 3	8
TPH09061	61.0	MK 2 / MK 3	8
TPH09065	65.0	MK 2 / MK 3	8
TPH09068	68.0	MK 2 / MK 3	8
TPH09070	70.0	MK 2 / MK 3	10
TPH09071	71.0	MK 2 / MK 3	10
TPH09075	75.0	MK 2 / MK 3	10
TPH09080	80.0	MK 2 / MK 3	10

Annular cutter cut up to four times faster than
twist drills. Annular cutter only cut the width of the
teeth. The core is ejected. Lower energy requir-
ements and less wear result in a longer working
life

Twist drill have to machine the entire diameter
of the hole. This calls for considerable downward
pressure and high driving power

Screw Annular cutterl into arbor holder.

Drill to full dimension straight away.
No centring or pre -drilling required.

The blade geometry of the annular
cutter permits rapid upward chip
removal.

Observe table of cutting speeds and
employ appropriate cooling agent.

The spring -loaded pilot pin facilitates removal of the cut -outs.

Further sizes available on request.

Arbor including pilot pin, tube and cooling-
spray bottle

Packing unit:individual carton

Part NO .	Description	For Ømm
TPH09102	MK 2 arbor with internal thread	120
	M 18 x 1.5 special thread	120
TPH09103	MK 3 arbor with internal thread
	M 18 x 1.5 special thread	100

Total 1 [ 1 ]